Carlo Gavazzi Solid State Relay Contactor 1-Pole Analog-Switch RN1F23V30

Carlo Gavazzi Solid State Relay Contactor 1-Pole Analog Full Cycle Switch with Heatsink, Control: 0-10VDC, Supply: 12-32VDC & 24VAC, Operational: 230VAC, 30A.

The analog switching relay provides a number of full cycles, evenly distributed over a fixed period, depending of the control input. The input of 4-20 mA or 0-10 VDC respectively, corresponds to zero and full output within a period of 1.28 s @ 50 Hz (1.07 s @ 60 Hz). This principle makes the transfer characteristics fully linear. The principle operates with zero switching, thus ensuring a reduced level of radiated and wire conducted noise. The 2 pole type has alarm LED indication by loss of master phase. The analog Full Cycle Switching is not recommended for light control due to light-flickering.

General Characteristics

• AC solid state relay, 1- and 2 poles.
• Analog switching for resistive loads (heating).
• 4-20 mA or 0-10 V controls.
• Rated operational current 30 and 50 AACrms.
• Rated operational voltage up to 480 VAC.
• LED-indication for normal operation and alarm status.
• IP 20 protection.
• DIN-rail mountable.